Control Panel

From Star Trek: Theurgy Wiki

Revision as of 21:59, 1 October 2019 by Auctor Lucan (talk | contribs) (Created page with "right|400pxControlled/display surfaces were composed of three basic layers. The outermost layer was fabricated from a 2.5 mm tripolymer-coated tran...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Control-Panel.png

Controlled/display surfaces were composed of three basic layers. The outermost layer was fabricated from a 2.5 mm tripolymer-coated transparent aluminium wafer into which was embedded a sensor matrix. This matrix detected tactile input by the operator's fingertips. Also incorporated into this layer was a transducer matrix that provides tactile and auditory feedback to the operator, indicating that a particular controlled surface addressed had been activated.

The aluminium surface wafer was chemically bond onto a triaxial optical display crystal membrane, which served as a high resolution graphic display medium. Monocrystal microwaveguides at 1. 8 mm intervals provided electro plasma system power transmission to the upper sensor matrix and transducer layers.

The substrate of the controlled surface was composed of microfoamed polyduranide sheeting, which provided structural integrity to the assembly. Incorporated into this layer was a matrix of optical nanoprocessors that permitted the display surface sheeting to be self-configuring, once addressed and initialized by the local processor node. For redundancy's sake, the panel nanoprocessors included sufficient nonvolatile memory to permit system operation, even in the absence of main computer support.